Skip to content
SLEIGHT
← The Library

How to Set a Pocket Watch: Stem-Set, Lever-Set and Quartz

Nov 15, 2026 · The Editors

How to set the time on a pocket watch: pull-out crown (stem-set), lever-set railroad watches, pin-set and key-set antiques, and quartz pocket watches — step by step.

To set most pocket watches, pull the crown out one click, turn it until the hands show the right time, and push it back in. Older watches may instead need a lever under the crystal, a small pin beside the stem, or a key — so first work out which kind you have.

What kind of pocket watch do you have?

TypeHow you can tellHow it sets
Stem-setthe crown pulls out with a clickpull crown, turn, push in
Lever-setcrown will not pull out; a small lever is hidden under the crystal or bezelopen bezel, pull lever, turn crown
Pin-seta small button or pin sits beside the stempress pin while turning crown
Key-setno crown, or a square post on the dial or backturn a key on the post
Quartzticks once a second; may say "quartz" on the dialpull crown, turn, push in

How to set a stem-set or quartz pocket watch

  1. Open the cover if it is a hunter case — on most, pressing the crown releases the front lid.
  2. Pull the crown out gently until it clicks. On a mechanical watch, the first position (pushed in) is for winding; pulled out is for setting.
  3. Turn the crown to move the hands to the correct time. Move them forwards where you can; it is gentler on older movements and on watches with a date or chime.
  4. Push the crown back in fully. On a mechanical watch, give it a few winds afterwards if it has run down. See how to wind a pocket watch.

Quartz pocket watches set the same way and do not need winding — the crown only sets the time. Our steampunk bronze pocket watch is quartz.

How to set a lever-set pocket watch

Lever-set watches were required on many North American railroads so that the time could not be changed by accident while winding.

  1. Open the front bezel (the ring holding the crystal). It usually unscrews or swings open on a hinge.
  2. Find the small lever at the edge of the dial, often near the 5 or the 1.
  3. Pull the lever out with a fingernail. You should feel it click.
  4. Turn the crown to set the hands.
  5. Push the lever back before closing the bezel. If it is left out, the bezel may not close, and the crown will not wind.

How to set a pin-set or key-set watch

Pin-set: look for a small button next to the stem. Press and hold it while turning the crown, and the hands move. Let go to return to winding.

Key-set: many early watches were wound and set with a small key. The setting post is usually the square arbor at the centre of the dial (with the crystal open) or on the back. Fit the key, turn gently, and go forwards only. Use the right-sized key; a loose key can round off the post.

Tips for setting a pocket watch

  • Do not force anything. If the crown will not pull, it is likely lever-set or pin-set.
  • Set past the hour and back a little on a mechanical watch, so the minute hand lines up with the marker.
  • Set to a reliable time source, such as your phone, and check again the next day to see how much it gains or loses.
  • Antique and valuable watches should be set gently and serviced by a watchmaker if anything feels stiff.

Hunter or open face?

The crown is at 12 on an open-face watch and usually at 3 on a hunter. If you are choosing between them, see hunter vs open face pocket watch. For carrying it, see how to wear a pocket watch.

Frequently asked questions

How do you set the time on a pocket watch?

On most watches, pull the crown out one click, turn it to set the hands, and push it back in. If the crown will not pull out, look for a lever under the crystal or a pin beside the stem.

How do you set a pocket watch with no pull-out crown?

It is probably lever-set: open the front bezel, pull out the small lever at the edge of the dial, turn the crown, then push the lever back.

Can you turn a pocket watch backwards?

On many simple watches it does no harm, but forwards is safer, especially on older movements or watches with a date or chime.

Do you have to wind a quartz pocket watch?

No. A quartz pocket watch runs on a battery; its crown only sets the time.